Peripheral Vertical Edgers

R-4

besanaR4picDesigned to pencil edge glass at very high rates of speed. With different wheel combinations, you can also flat edge with seams and ogee. This machine features a special lowered conveyor system to edge pieces as small as 2 1/2 inches in height. The R-4 features two peripheral diamond spindles and two peripheral polish spindles. The minimum glass size is 6 x 6 inches. Diamond wheel size is 150mm in diameter with a 50mm bore. Polish wheel size is 250mm with a 50mm bore. The R-4 grinds and polishes glass from 1/8 to 3/4 inches thick. A positive belt inlet-outlet conveyor system is also use to lower the cost of maintenance. Multiple wheels can be mounted on the diamond spindles to facilitate flat edge or pencil edge operations. All diamond and polish wheels can be angled together soothe operator can edge different thicknesses of glass without changing wheels.

R-6

besanar6ogpicA versatile machine capable of performing pencil, ogee and flat edges. It featured two peripheral diamond spindles, a two spindle arrising section and two peripheral polish spindles. It is able to edge glass from 1/8 to 3/4 inches thick. The minimum glass size is 8 x 8 inches. Multiple wheels can be mounted on the diamond spindles to facilitate flat edge or pencil edge operations. The inlet-outlet conveyor system is stainless steel rubber block chain. Diamond wheel size is 150mm in diameter with a 50mm bore. Polish wheel size is 250mm with a 50mm bore. Arris wheel size is 125mm diameter, 50mm height, and 25mm bore. All diamond and polish wheels can be angled together so the operator can edge different thicknesses of glass without changing wheels.

R-8 OG:

A versatile machine capable of performing pencil, ogee and flat edges. It features three peripheral diamond spindles, three peripheral polish spindles, and two cerium felts. The two felt wheels and a separate cerium recirculation tank enhance its ability to perform a brilliant furniture grade finish on heavy glass. The Besana ogee machines are the only machines in the industry capable f running 3/4” ogee at 50” per minute. It is able to edge glass from 1/8 to 3/4 inches. The minimum glass size is 8 x 8 inches. All diamond and polish wheels can be angled together so the operator can edge different thicknesses of glass without changing wheels. Diamond wheels size is 150mm in diameter with a 50mm bore. Polish wheel size is 250mm with a 50mm bore.

CMB

Product PDFs